Control Codes: SIDM Commands Summary • 46
Turn Double Wide Mode ON/OFF ESC W pn
Set Left/Right Margins ESC X pn pm
Select High Speed Double Density Graphics ESC Y ln hn data
Select Quadruple Density Graphics ESC Z ln hn data
Turn Double High Wide,Line Spacing Mode ESC [ @ ln hn pm1..pmk
ON/OFF ESC [ pm ln hn Trap
Trap command ESC [ K ln hn init id p1 p2
Set Initial Condition ESC [ T ln hn NUL NUL hcp lcp
Select Codepage NUL
Print Continuously from All Character Chart ESC \ ln hn
Reverse LF ESC ]
Print Single from All Character Chart ESC ^ pn
Turn Overscore Mode ON/OFF ESC _ pn Trap
Relative move inline forward ESC d ln hn Trap
IBM PPR Control Codes (continued)
Function Command Sequence Remarks
To Next Page
Loading...
