Control Codes: SIDM Commands Summary • 47
Relative move inline backward ESC e ln hn Trap
Trap ESC f pn Trap
Select 15CPI ESC g Trap
Select Print Suppress Mode (Stop Printing) ESC j Trap
Select aspect ratio ESC n pn Trap
Select color Mode ESC r pn Trap
Change Emulation Mode ESC { pn Trap
Set Relative Print Position ESC | ln hn Trap
Soft I-PRIME ESC } NUL Trap
Set Print Head Thermal Alarm Check Mode ESC ~ Trap
Set Print Position ESC DLE @ pno a1 a2 p1-p4 Trap
Emulation Change ESC DEL n
Multi Port I/F ESC / i n L X
IBM PPR Control Codes (continued)
Function Command Sequence Remarks
To Next Page
Loading...
