B6500 Network Guide> 34
Command Format
lpstat [Option]
Command Options
The following command options are available:
If no option is specified, all the print data-related information will be
displayed.
The sequence of the options does not affect the outcome.
To use more than one argument at the same time, separate them
by commas and enclose all the arguments with " ".
E.g. %lpstat -u "user1,user2,user3"
-o [Printer name]
This option displays the print data received. The printer name is
specified in the argument.
-t
This option displays all the information.
-u [User name]
This option displays received print data information on users of
specified user names.
-v [Printer name]
This option displays the printer name and the device path name. The
printer name is specified in the argument.
Precautions
• Long file names will be truncated.
• Up to 64 print instruction information can be displayed.
• If two or more types of print languages/modes are set up on
a single workstation, identical job numbers may be displayed
when an inquiry command (lpstat) is issued.
To Next Page
Loading...
