Oki B6500

B6500 Network Guide> 52
U SING W INDOWS NT 4.0/2000/XP/S ERVER 2003
The Printer Is Not Printing
Cause Verification Action
Incorrect IP address. Ask the network admin-
istrator to check that the
IP address is correct.
Set up the correct IP
address for the printer.
If LPD spool is set to
[On], the print data
sent by the user in a
single print instruction
has exceeded the
remaining storage
capacity of the desti-
nation device.
Check the remaining
storage capacity of the
destination device.
1. If single print data has
exceeded the storage
capacity of the destina-
tion device, free space
on the device, or split
the file into smaller ones
to keep them below the
remaining storage space.
2. If multiple files have
exceeded the storage of
the destination device,
reduce the number of
files which can be sent at
a time.
An irrecoverable error
has occurred during
printing.
Check the error message
on the printer control
panel.
Switch off the printer,
then switch it on again.
The data format of the
print data to be proc-
essed by the printer
and that sent by the
computer are different.
- Disable the output func-
tion of Ctrl-D.