B6500 Network Guide> 49
Delete
• Print data which consists of multiple files sent in one print
instruction, cannot be deleted file by file. All the files will be
deleted at one go.
• This command will become invalid if it is executed without
options having been specified or if there is no print data
which matches the option.
• A workstation can only delete print data it has sent. It cannot
delete print data sent by other workstations.
• Print data which is in the process of printing may not be
deleted.
Inquiry
• Long file names will be truncated.
• Up to 64 print instructions can be displayed.
• If two or more types of print languages/modes are set up on
a single workstation, identical job numbers may be displayed
when an inquiry command is issued.
• In the non-spool mode, the client must be a Windows NT
machine to use this option.
Others
• When the IP address or the computer name of a workstation
is changed, the printer may not process inquiries or deletions
correctly. Make sure the printer is free of all spooled data and
switch off/on the printer.
NOTE
The function to stop/eject print data spooled to the printer spool
can be operated from the printer control panel. Refer to the Setup
Guide for information on this operation.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
