Oki B6500

B6500 Network Guide> 41
P RINTING F ROM A M ACINTOSH C OMPUTER
P RINTING F ROM A M ACINTOSH C OMPUTER
This section explains the installation procedure for printing from a
Macintosh computer.
S YSTEM C ONFIGURATION
As the printer supports EtherTalk and LPD protocol, you can print
from Macintosh.
NOTE
> Printing using the LPD protocol is available only with the
Mac OS X.
T ARGET C OMPUTERS
The printer supports a Macintosh or Power Macintosh with the
following OS:
> Mac OS 9 and up
> Mac OS X
Refer to:
> User Guide (PostScript Driver)
S ET U P P ROCEDURE
The setting procedure is as follows:
1. Setting up the printer
Use the printer control panel or printer web page to set the
following port to [Enable].
• Printing through LPD: LPD port (default: [Enable])
• Printing through EtherTalk: EtherTalk port (default:
[Disable])
NOTE
> For details on how to set the port, refer to the User Guide.
> The printer web page allows more detailed settings.