Oki B6500

B6500 Network Guide> 40
Specifying Color and Print Modes
The following color and print mode parameters can be specified:
NOTE
> If several parameters are specified in one "lpr" command,
data may not be printed.
> For some print language, the specification may be invalid.
> The system default is used if no parameter is specified.
> The color setting is not available on this printer.
P RINTING
To specify the output format of printing, enter the following
command:
-C, [Parameter], [Parameter]
Enter a "," (comma) after -C followed by the parameters which
specify the output format. To specify multiple parameters, separate
them with ",".
For example, to output a file named "file1" 2-sided on A4 to printer
"P001", enter the following command:
Important:
> If the command specified by the -C option exceeds 64
characters, the operation may not function correctly.
PARAMETER DESCRIPTION
CC/cc Selects color for color mode and quality priority for print mode.
CB/cb Selects color for color mode and speed priority for print mode.
GC/gc Selects monochrome for color mode and quality priority for
print mode.
GB/gb Selects monochrome for color mode and speed priority for
print mode.
AC/ac Selects auto (color/monochrome) for color mode and quality
priority for print mode.
AB/ab Selects auto (color/monochrome) for color mode and speed
priority for print mode.
%lpr -P P001 -C, DUP, A4 file1