Oki B930dn User Manual

B930n User’s Guide> 58
Select the desired number of signature from the pulldown.
Signature sets the number of pages printed on a sheet to form
a booklet. Options are No Limit, or a number which is a
multiple of 4.Enter a bind margin and the units used to
calculate the bind margin. Check the box if right-side binding
is desired
4. Click OK.
5. Click OK.
Poster Print
If you have a large page image that can not be printed on the
available paper sizes, you can print the document in poster print.
Poster Print prints the document to a full bleed (to the edges of
paper) and breaks the document up into multiple pages. The pages
can then be placed together, edge-to-edge, to create a large version
of the print job.
Enable this feature is using your Printer Properties.
To print in poster mode:
1. Select Poster from the Finishing Mode pulldown in the
Setup Tab of your Printer Properties.
2. Click Options.
The Poster window appears.
3. Enter the desired parameters.
Enter the X and y axis enlargement and orientation.
4. Click OK.
5. Click OK.
Fit to Page
You can scale any page image to fit the paper size being used.
The most convenient way to enable this feature is by using your
Printer Properties. You may also enable this feature at the Operator
Panel or by using the EWS.
To scale the print image:

Oki B930dn Specifications

Performance

print speed	50 pages per minute
time to first page	7 seconds
print resolution	1200 x 1200 dpi
CPU	600 MHz
duty cycle	300, 000 pages per month

Memory

standard RAM memory	256 MB
maximum RAM memory	768 MB
bitmapped fonts	47 PCL

Weight and Dimensions

dimensions	20.0" x 25.0" x 21.0" (50.8 cm x 63.5 cm x 53.3 cm)
weight	90.0 lb. (32.1 kg)
paper size	5.8" x 8.3" min. to 11" x 17" max.