Oki C542dn User Manual

- 147 -
7. Operating Management/ Specifications
1
Press [Device Settings] on the touch panel.
2
Press or several times and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Press [Manage Unit].
5
Press [Power Save].
6
Press [Sleep Time].
7
Select transition time.
The machine does not enter Sleep mode in the following case.
• When an error occurs on the machine
• Access Control in the Access Control settings is enabled and Local IC Card or LDAP IC
Card in the Authentication Method is enabled.
The machine does not enter Deep Sleep mode in the following cases.
• IPSec is enabled
• A TCP connection is established
Example: A connection is established with Telnet or FTP.
When the transition time to enter Sleep mode or Deep Sleep mode from Power Save
mode elapses and the connection is disconnected, the machine enters Sleep mode.
• E-mail reception is enabled
• Wireless LAN is enabled
• Google Cloud Print is enabled
• LLTD is enabled
• IPv6 Global Address is assigned
In Deep Sleep mode, you cannot use the following protocols to print.
•NBT
In Deep Sleep mode, you cannot search or set by using the following functions and
protocols.
•NBT
In Deep Sleep mode, the following protocols that have the client function do not operate.
• E-mail alert*
2
•SNMP Trap
•WINS*
1
•SNTP*
2
Setting the Length of Idle Time Before Entering Sleep Mode Restrictions in Power Saving Function
*1 The elapse time in Deep Sleep mode is not included in the intervals of WINS update
time.
WINS regular updates are not performed in Deep Sleep mode, possibly resulting in
names that are registered in the WINS server being deleted.

Oki C542dn Specifications

General

Brand	Oki
Model	C542dn
Category	Printer
Language	English