- 10 -
1
1. Setup
1. Setup
How to set up is explained in this chapter.
Setup Flow
1. Checking Products
● Checking package contents
● Checking names of the operator panel and how to
operate
● Checking names of product parts
● Checking options
2. Checking the Placement Environment
● Checking the placement environment
● Checking placement location
3. Preparing a Printer
● Unpacking
● Removing cushioning materials
● Installing consumables
● Loading paper
● Turning on/off the power
● Installing options
● Test printing from the printer
4. Connecting to a Computer
Connecting through network Connecting through USB
For Windows For Macintosh For Windows For Macintosh
Connecting through
EtherTalk
Connecting
through Bonjour
Specifying an IP address
on the operator panel
Enabling EtherTalk on the
operator panel
Disabling the sleep mode on the operator panel Connecting a cable
Connecting a cable
Installing a printer driver on a computer
Adding printers on a computer Connecting a
cable
Adding printers on a
computer
Enabling the sleep mode on the operator panel
Test printing from a computer
To Next Page
Loading...
Need help?
General
