Oki C822n - Test Printing from the Printer

- 29 -
Preparing Your Printer
1
1. Setup
12 Press the scroll button several times
to select [System] and press the
<ENTER> button.
䎦䏒䏑䏉䏌䏊䏘䏕䏄䏗䏌䏒䏑䎃䎃䎃䎔䎒䎔
䎶䏘䏓䏓䏏䏌䏈䏖䎃䎯䏌䏉䏈
䎱䏈䏗䏚䏒䏕䏎
䎶䏜䏖䏗䏈䏐
䎷䏕䏄䏜䎃䎦䏒䏘䏑䏗
13 Press the scroll button several times
to select [SD Card] and press the
<ENTER> button.
䎶䏜䏖䏗䏈䏐 䎃䎃䎃 䎃䎃䎃䎕䎒䎕
䎩䏏䏄䏖䏋䎃䎰䏈䏐䏒䏕䏜
䎶䎧䎃䎦䏄䏕䏇
䎷䏒䏗䏄䏏䎃䎰䏈䏐䏒䏕䏜
14 Check that the value of [SD Card] is
[16 GB].
䎶䎧䎃䎦䏄䏕䏇 䫹 䫹䫹䎃 䎔䎒䎔
䎔䎘䎪䎥䎾䎩䎘䎕䏀
Note
● [15 GB] may be displayed in [SD Card]. This is not an
error.
● If the value of [SD Card] has not increased, turn off
your printer and unplug the AC cord and Ethernet or USB
cable, and then reinstall the SD memory card.
15 Press the <ON LINE> button.
Test Printing from the Printer
Check that you can print with the printer. Check
the detailed settings and status of your printer
by printing the contents of the settings (Menu
Map).
Note
● When a printer is in the power saving mode, press the
<POWER SAVE> button to restore from the mode.
1 Press the <Fn> key on the operator
panel.
2 Enter “100” using the ten-key pad and
press the <ENTER> button.
䎩䏘䏑䏆䏗䏌䏒䏑䎃䎱䏘䏐䏅䏈䏕
䎨䏑䏗䏈䏕 䎃 䎔䎐䎖 䏇䏌䏊䏌䏗䎃 䎱䏘䏐䏅䏈䏕
3 Press the <ENTER> button as
[Execute] is selected.
䎦䏒䏑䏉䏌䏊䏘䏕䏄䏗䏌䏒䏑䎃䎃䎃䎔䎒䎔
䎨䏛䏈䏆䏘䏗䏈
4 After nishing a print of printer settings,
a setup for printing from a printer
completes.
Reference
● You can also print reports and lists for each function.
Refer to the User’s Manual (Advanced).