Oki C822n - Page 28

- 28 -
Preparing Your Printer
1
1. Setup
5 Install the SD memory card (4) into the
SD memory card socket (5).
4
5
6 Install the SD memory socket to the
printer with the screw (6) and tab (7) for
the SD memory card socket and attach
the connector (8).
6
7
8
7 Install the metal plate (2).
(1) First, insert the upper part of the
metal plate (2) in the printer, then
install the metal plate.
➊
➋
2
(2) While holding the lower part of the
metal plate (2), slide the metal plate
downward and secure it.
2
➊
➋
8 Close the access cover (1).
1
9 Plug the AC cord and Ethernet or USB
cable into your printer, and then turn on
the power switch.
10 Press the <ENTER> button on the
operator panel.
11 Check that [Conguration] is selected
and press the <ENTER> button.
䎩䏘䏑䏆䏗䏌䏒䏑䏖 䎃䎃䎃䎃䎃䎃䎔䎒䎕
䎳䏕䏌䏑䏗䎃䎬䏑䏉䏒䏕䏐䏄䏗䏌䏒䏑
䎳䏕䏌䏑䏗䎃䎶䏈䏆䏘䏕䏈䎃䎭䏒䏅
䎰䏈䏑䏘䏖
䎦䏒䏑䏉䏌䏊䏘䏕䏄䏗䏌䏒䏑