- 110 -
Replacing Consumables and Maintenance Units
4
4. Maintenance
Procedure for Replacement
(for C (cyan), M (magenta),
Y (yellow) Toner Cartridges)
Memo
● When replacing the K toner cartridge, refer to “Procedure
for Replacement (for K (black) Toner Cartridge)” P.108.
1 Prepare new toner cartridges.
2 Insert your nger into the recess on
the right side of the printer and pull the
front cover open lever (1) to open the
front cover (2) forward.
1
2
3 Press the top cover open button (3) and
open the top cover (4).
CAUTION
Possible to get
burned.
● The fuser unit is extremely hot. Do not touch
it.
3
4
4 Identify an empty toner cartridge by its
label color (5).
5
5 Slide the right blue lever (6) of the toner
cartridge while pressing the top of the
cartridge to unlock.
6
6 Lift the toner cartridge (7) from right
side, and remove it from the printer.
Possible to get
burned.
● Do not throw a used toner cartridge in the
re. They may explode, and the toner inside
may y off and cause getting burned.
7
➊
➋
➌
To Next Page
Loading...
