- 20 -
Preparing Your Printer
1
1. Setup
3 Slide the paper guide (3) and paper
stopper (4) to the size of paper to be
loaded.
3
4
Note
● When loading the A6 size paper, move the paper
stopper (4) forward and remove it once, then install
it on the metal part.
4
4 Flex paper back and forth, and then fan
it. Straighten the edges of the paper
stack on a level surface.
5 Load paper with the print side face down
and press it from above.
Note
● Do not load paper exceeding the [▼] mark (5) of the
paper guide.
5
6 Check if a size of loaded paper matches
the setting of paper size dial.
7 Return the paper tray to the printer.
Memo
● If loading a paper that you cannot select the
size with a paper size dial options, set the dial to
[Other], and then set a paper size on the operator
panel.
8 Open a le you want to print, and print
it.
To Next Page
Loading...
