- 24 -
Preparing Your Printer
1
1. Setup
2 Place a printer on the additional tray
gently aligning the back sides of a
printer and the additional tray.
3 Plug the AC cord and Ethernet or USB
cable into your printer, and then turn on
the power switch.
Installing Additional RAM
Install additional RAM to increase the memory
capacity of your printer in cases such as if
memory overow or the collate print errors
occur. Your printer supports 256 MB and 512 MB
RAM.
Note
● Use only genuine Oki Data products. The performance
cannot be guaranteed when using other products.
Memo
● For banner printing, installing additional memory is
recommended.
1 Turn off your printer, and then unplug
the AC cord and Ethernet or USB cable.
Reference
● “Turning Off the Power” P.22
2 Open the access cover (1) on the right
side of a printer.
1
3 Slide the metal plate (2) upward to
remove.
Note
● If the SD memory card socket is attached, remove
the SD memory card.
To Next Page
Loading...
Need help?
General
