Oki C822n - Page 26

- 26 -
Preparing Your Printer
1
1. Setup
7 Close the access cover (1).
1
8 Plug the AC cord and Ethernet or USB
cable into your printer, and then turn on
the power switch.
9 Press the <ENTER> button on the
operator panel.
10 Check that [Conguration] is selected
and press the <ENTER> button.
䎩䏘䏑䏆䏗䏌䏒䏑䏖 䎃䎃䎃䎃䎃䎃䎔䎒䎕
䎳䏕䏌䏑䏗䎃䎬䏑䏉䏒䏕䏐䏄䏗䏌䏒䏑
䎳䏕䏌䏑䏗䎃䎶䏈䏆䏘䏕䏈䎃䎭䏒䏅
䎰䏈䏑䏘䏖
䎦䏒䏑䏉䏌䏊䏘䏕䏄䏗䏌䏒䏑
11 Press the scroll button several times
to select [System] and press the
<ENTER> button.
䎦䏒䏑䏉䏌䏊䏘䏕䏄䏗䏌䏒䏑䎃䎃䎃䎔䎒䎔
䎶䏘䏓䏓䏏䏌䏈䏖䎃䎯䏌䏉䏈
䎱䏈䏗䏚䏒䏕䏎
䎶䏜䏖䏗䏈䏐
䎷䏕䏄䏜䎃䎦䏒䏘䏑䏗
12 Press the scroll button several times
to select [Total Memory] and press the
<ENTER> button.
䎶䏜䏖䏗䏈䏐䎃䎃䎃䎃䎃䎃䎃䎕䎒䎕
䎩䏏䏄䏖䏋䎃䎰䏈䏐䏒䏕䏜
䎶䎧䎃䎦䏄䏕䏇
䎷䏒䏗䏄䏏䎃䎰䏈䏐䏒䏕䏜
13 Check that the value of
[Total Memory ] has increased.
䎷䏒䏗䏄䏏䎃 䎰䏈䏐䏒䏕䏜 䫹䎃䎔䎒䎔
䎚䎙䎛䎰䎥
- For memory expanded to 256 MB, it is
[512 MB]; for memory expanded to 512
MB, it is [768 MB].
Note
● If the value of [Total Memory] has not increased, turn
off your printer and unplug the AC cord and Ethernet or
USB cable, and then reinstall the additional RAM.
14 Press the <ON LINE> button.