Oki C822n - Page 39

- 39 -
Connecting to a Computer
1
1. Setup
11 Click [IP Printer].
For Mac OS X 10.3.9, select
[IP Printing] from the pop-up menu.
12 Enter IP address in [Address] and
then check that [OKI C822(PCL)] is
displayed in [Print Using].
For Mac OS X 10.3.9, set as follows.
a Enter IP address in
[Printer Address].
b Select [Oki] from [Printer Model]
and then select [OKI C822(PCL)]
from the driver list.
13 Click [Add].
14 Check that the name of your printer is
displayed in [Printer List], and then
close the window.
15 From the [Go] menu, select
[Applications] and then double-click
[TextEdit].
16 Select the [File] menu > [Page Setup].
17 Select the name of your printer from
[Format for].
18 Check that the [OKI C822(PCL)] is
displayed correctly under [Format for].
19 Click [OK].
20 Remove “Software DVD-ROM” from the
computer.
 Next, enable the sleep mode on the
printer.
Note
● If using the EtherTalk, disable the sleep mode.
1 Press the <ENTER> button on the
operator panel.
2 Press the scroll button several times
to select [Admin Setup], and then
press the <ENTER> button.
䎩䏘䏑䏆䏗䏌䏒䏑䏖䎃䎃䎃䎃䎃䎃䎕䎒䎕
䫹 䎦䏄䏏䏌䏅䏕䏄䏗䏌䏒䏑
䎤䏇䏐䏌䏑䎃䎶䏈䏗䏘䏓