- 109 -
5. Management / Setting the Printer
• Set the security setting for your browser to the middle level, or enable Cookie.
• To enter the [Admin Setup] menu, the administrator password is required. The factory default password is
"123456".
• To change settings of the machine on the Web page, you must log in as the administrator of the machine.
• About how to set a network
Connecting to a Wireless LAN (User's Manual)
Connecting a LAN Cable (User's Manual)
Connecting to a Wireless LAN (User's Manual)
The description uses the following environment as an example.
· Device name: C844
· IP address of the machine: 192.168.0.2
Checking the Machine Status
1
Open the Web page of this machine.
Open the Web Page of This Machine
2
Log in as the administrator.
3
The following screen is displayed.
You can check the remaining amount of the consumables, printing counter, and
information of network and system of this machine.
Changing Printer Settings
You can change the main unit’s settings from the web page.
1
Open the Web page of this machine.
Open the Web Page of This Machine
2
Log in as the administrator.
3
Change the settings and click [Submit].
You can change the setting of this machine from the following tabs.
• Paper Setup
You can set a paper size and type for each tray.
• Admin Setup
• Job List
• Direct Print
• Links
• User Management
Checking or Changing the Settings of the Printer
To Next Page
Loading...
