Oki C844 - Checking the Settings of the Machine; Set Options Automatically

- 164 -
6. Utility Software
You can check the settings of this machine.
1
Open the [Printer Properties] screen.
2
Select the [Status] tab.
3
Click [Update].
4
Click [OK].
Click [Web Setting] to start the webpage automatically. You can change settings of this
machine on this webpage screen.
Web Page of This Machine
• The [Status] tab may not be displayed, if you use Network Extension in unsupported environments.
You can get the composition of options of the connected machine and automatically set the
printer driver.
• For Windows PCL Printer Driver
1
Open the [Printer Properties] screen.
2
Select the [Device Options] tab.
3
Click [Get Printer Settings].
4
Click [OK].
• For Windows PS Printer Driver (C834/C844/ES8434)
1
Open the [Printer Properties] screen.
2
Select the [Device Settings] tab.
3
Click [Get installable options automatically] and then click [Setup].
4
Click [OK].
• You cannot configure this when using Network Extension in unsupported environments.
Checking the Settings of the Machine Set Options Automatically