To Next Page

To Previous Page

- 178 -

7. Using from a Mobile Device

Enter the administrator password using the numeric keys, and then press the

«ENTER» button.

The factory default administrator password is "123456".

Check that [Wireless(AP Mode)] is set to [Disable], press the scroll button

to select [Enable].

Press the «ENTER» button.

• Printing with NFC Function

Bring the NFC antenna of the mobile device and the NFC mark on the

machine into contact.

registered, set only the output destination.

Select the object you want to print.

Tap [Print].

• The location of the NFC antenna differs depending on the mobile device, refer to the instruction manual of the

mobile device for details.

Using AirPrint (Print) allows you to print from a Mac without installing drivers. You can print

from an iPhone, iPad, and iPod touch with using AirPrint (Print). An overview of AirPrint is

provided, and the basic settings are described here.

About AirPrint (Print)

AirPrint (Print) is a function that enables you to easily print from a Mac. You can print from an

iPhone, iPad and iPod touch with using AirPrint (Print). The mobile device or Mac

automatically detects this machine.

With AirPrint (Print), you can easily print a photo, e-mail, Web page or other displays on the

screen just by tapping the screen a few times.

These features require to connect this machine to a Mac via a wired LAN, wireless LAN, or

USB cable.

For more information about AirPrint, visit the Apple Inc. website.

Setting AirPrint (Print)

Connect this machine to the same network as a mobile device.

Connect this machine to a mobile device via wireless access points or by wireless LAN (AP

mode) directly.

Connect this machine to the access points with a wired or wireless LAN (Infrastructure).

If you want to connect with a wireless LAN (Infrastructure), set the wireless LAN

(Infrastructure) in advance.

Connecting to a Wireless LAN (User's Manual)

AirPrint (C834/C844/ES8434)

Oki C844 Advanced Manual

Other manuals for Oki C844