- 133 -
6. Utility Software
• The procedure below varies depending on the selected software.
The installation of the Configuration Tool is used as an example.
10
Click [Next].
Installation starts.
11
When installation is complete, click [Finish].
•For Mac
You can copy a utility by dragging to any location. You can also run a utility directly from the
"Software DVD-ROM".
1
Insert the included "Software DVD-ROM" into a computer.
2
From [OKI] > double-click the [Utilities] folder.
3
Copy the folder of a utility to install by dragging to any location.
• To start utility software, double-click the software icon in the folder.
To Next Page
Loading...
Need help?
General
