C8800 User’s Guide
103
PCL Emulation Menu
This menu controls settings effective when the printer is
operating in PCL emulation mode.
Notes:
Factory default settings are shown in
bold.
Settings with a dagger (†) only appear when the
appropriate option is installed.
ItemS Settings Explanation
FONT SOURCE RESIDENT /
DIMM0 /
DIMM1 /
DOWNLOADED
Specifies the location of the PCL default
font. Normally this will be INTERNAL
unless additional fonts are installed in
the expansion ROM slot or additional
fonts have been downloaded to RAM as
permanent fonts.
FONT No. I0/ C001 /
S001
Sets the current default font number
from the currently selected source,
which could be internal (I), ROM slot
(C) or downloaded (S).
FONT PITCH 10.00CPI +/- Sets the pitch in Characters per Inch in
increments of .01CPI
SYMBOL SET PC-8 PCL symbol set. If the font source and
number are changed to one which does
not support the selected symbol set,
this must be changed to an available
symbol set for that font.
A4 PRINT
WIDTH
78 COLUMN
80 COLUMN
Sets the number of columns subject to
Auto LF with A4 paper in PCL. This is
the value when Auto CR/LF Mode is set
to OFF with the 10CPI character.
WHITE PAGE
SKIP
OFF / ON Selects whether blank pages are
printed or not.
CR FUNCTION CR / CR+LF Selects whether a received carriage
return character (0Dh) also causes a
line feed.
LF FUNCTION LF / LF+CR Selects whether a received line feed
character (0Ah) also causes a carriage
return.
PRINT MARGIN NORMAL
1/5 INCH
1/6 INCH
Sets the non-printable page area.
NORMAL is PCL compatible.
To Next Page
Loading...
Need help?
Performance
Memory
Paper Handling
Supplies
Weight and Dimensions
