C8800 User’s Guide
99
Color Menu
The printer automatically adjusts color balance and density at
appropriate intervals, optimizing the printed output for bright
white paper viewed in natural daylight conditions. The items
on this menu provide a means of changing the default settings
for special or particularly difficult print jobs.
Notes:
Factory default settings are shown in
bold.
Settings with a dagger (†) only appear when the
appropriate option is installed.
Item Settings Explanation
DENSITY
CONTROL
AUTO
MANUAL
If set to AUTO, image density will be
automatically adjusted at power on,
when a new image drum or toner
cartridge is installed, and at intervals of
100, 300 and 500 drum counts. If a 500
drum count interval occurs during a
print job it will occur at the end of that
job, and will take up to 55 seconds. If
set to manual, this adjustment will only
be performed when initiated by the next
menu item.
ADJUST
DENSITY
EXECUTE Selecting this will activate adjustment
of the color density.
COLOR TUNING PRINT PATTERN Selecting this item prints the color
tuning pattern to help you adjust the
color balance.
x HIGHLIGHT
x MID-TONE
x DARK
x =
C: Cyan
M: Magenta
Y: Ye l low
K: Black
-3~0~+3
-3~0~+3
-3~0~+3
Adjusts image density for each color
component (cyan, magenta, yellow and
black). Normal setting is 0.
x DARKNESS
x =
C: Cyan
M: Magenta
Y: Ye l low
K: Black
-3~0~+3 Adjusts darkness of each color
component (cyan, magenta, yellow and
black). Normal setting is 0.
To Next Page
Loading...
Need help?
Performance
Memory
Paper Handling
Supplies
Weight and Dimensions
