C8800 User’s Guide
333
If CD does not AutoPlay, click Start → Run → Browse.
Browse to your CD-ROM. Double-click Install.exe. Click
OK.
2. Click Network Software → Administration
Tools → Network Printer Status. Follow the on-screen
instructions.
Using
1. Click Start → Settings → Printers. Right-click the
Sharp Printer icon. Click Properties.
2. Click on the STATUS tab.
3. Click the UPDATE button to see device settings.
4. Click on an item to see this information:
NOTE: If the Automatic Status Check box is checked, this
utility “pings” the printer every time you open the Printer
Properties dialog in the printer driver.
This severely slows opening Printer Properties.
Trays: Paper Type, weight
Duplex: Installed/not installed
Disk/Memory: RAM size and % used;
Flash Memory size and % used
Toner Remaining: % toner remaining in all cartridges
To Next Page
Loading...
