- 194 -
Windows utilities
4
5
1
3
2
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
13
Check that the "Language format"
in the menu print results is within
the numerical range displayed in the
window, and click [Next].
14
Select the details to be set up, and click [Setup].
Memo
z
The [Language version:] window displays the
language version of the language le included in the
tool.
15
Click [Finish].
16
Look at the device control panel to
verify that the download was successful,
and restart the device.
Power OFF/ON
Message Data Received
OK
Restart the device
Finished writing message
data
English display image
Japanese display image
Direct Network Printing
Utility (LPR)
Operations environment
PCs running Windows 8.1/Windows 8/Windows
7/Windows Vista/Windows XP/Windows Server
2012 R2/Windows Server 2012/Windows Server
2008 R2/Windows Server 2008/Windows Server
2003 Versions
PCs operating using TCP/IP
Note
z
PC administrator privileges are required for the setup.
z
Print method functions cannot be used.
Starting up
1
Select [Start]>[All Programs]>[OKI
Data]>[Direct Network Printing Utility
(LPR)] to start the Direct Network
Printing Utility (LPR).
The following window will be displayed.
Displayed if “Printing using
multiple printers simultane-
ously” (P.198) has been set.
The number of jobs (data)
that have nished
sending will be displayed.
The number of
jobs (data) that
have not yet
been sent will be
displayed.
The status of the Direct Network
Printing Utility (LPR) data will be
displayed. (This is different from the
actual printer status.)
Displayed if "Display
comments" has been
set using “Adding
comments” (P.200).
Printers registered
to the OKI LPR
utility
To Next Page
Loading...
Need help?
General
