Oki C931 User Manual

- 227 -
5
1
2
4
3
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
Using DHCP
Setting the printer
To use the device on a DHCP environment, set
the IP address setup method to automatic.
Further, the default factory setting is to set the
IP address automatically, so implementing this
procedure is unnecessary.
1
Press the scroll button or .
2
Select [Admin Setup], and press the
[OK] button.
3
Enter the administrator password, and
press the [OK] button.
4
Select [Network Setup], and press the
[OK] button.






Admin Setup 1/3 Page
Network Setup
Print Setup
PS Setup
PCL Setup
XPS Setup
Use
Online
button
to
return
to
standby
screen
USB Setup
5
Select [IP Address Set], and press the
[OK] button.






Network Setup 1/3 Page
TCP/IP
EtherTalk
IP Address Set
IPv4 Address
Subnet Mask
Use Online button to return to standby screen
NetBIOS over TCP
6
Select [Auto], and press the [OK]
button.






TCP/IP
NetBIOS over TCP
EtherTalk
IP Address Set
IPv4 Address
Subnet Mask
Use Online button to return to standby scr
Network Setup
Use Online button to return

Manual
Auto

1/1 PageIP Address Set
7
Press the [ON LINE] button to return to
the standby screen.

Oki C931 Specifications

General

Print Technology	LED
Print Resolution	1200 x 1200 dpi
Print Speed Black	50 ppm
Print Speed Color	50 ppm
Monthly Duty Cycle	300, 000 pages
Duplex Printing	Yes
Operating Systems Supported	Windows, Mac OS, Linux
Connectivity	Ethernet
Paper Capacity	530 sheets (standard tray)