- 22 -
Printing on various papers
4
1
2
3
5
Apéndice Índice
Comprobar y cambiar
la conguración de la
impresora utilizando el
panel de control
Cong de
red
Concordar
los colores
Utilización
de software
de utilidades
Funciones de
impresión útiles
z
Printing on various papers
Printing on envelopes
Memo
z
For the types of envelopes that can be used, see “Usable
Paper Types” in “Basic”.
z
For the Multi-Purpose Tray preparations, see "Setting
paper in the Multi-Purpose Tray" in "Basic".
z
You can print by manually feeding one page at a time from
the Multi-Purpose Tray. For details, see “Printing single
sheets manually” (P.87).
Note
z
2-sided printing and printing from paper trays are disabled
for envelopes.
z
Print speed will be slowed.
z
Setting the paper orientation
Set the print surface face-up.
Set as a diagram to print the addressee.
(Yougata 0 gou/2
gou/4 gou
Yougata Long 3 gou)
(Yougata 0 gou/2
gou/4 gou
Yougata Long 3 gou)
Com-9, Com-10
DL, C4, C5
Monarch
(Kakugata
2 gou)
Before setting
1
Check that the envelope is not bent or
swollen.
2
If the envelope is bent, hold the
diagonally-opposite edges of the
envelope and slowly bend to straighten
the envelope.
3
If there is a difference in the thickness
on the left and right when the envelopes
are stacked, use a rod to make the
thickness universal.
z
Cross-sectional diagram of an envelope
Memo
z
If the front edge of the envelope is bent or
swollen, extend the envelope out at as shown
in the diagram below.
To Next Page
Loading...
Need help?
General
