- 257 -
5
1
2
4
3
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
Setting the network from the web browser
4
Enable the SNMP version to be used
check box in [STEP1], and click [To
STEP2].
Memo
z
If [SNMPv3] is selected, referencing and setups
using SNMPv1 will be disabled. If [SNMPv3+v1] is
selected, both SNMPv1 and SNMPv3 can be used for
referencing, but only NMPv3 can be set.
5
Enter the SNMPv3 user name in [User
Name] in [STEP2].
6
Enter the authentication password in
[Passphrase] in [Authentication Settings].
7
Select [Algorithm].
8
Enter the encryption pass phrase in
[Passphrase] in [Privacy (Encription) Settings].
Memo
z
Only [DES] can be selected as the encryption algorithm.
9
Click [Submit].
10
The settings will be save in the printer,
and the network functions will restart.
Memo
z
Set the context name for the SNMP manager to be used in
"v3context".
To Next Page
Loading...
