1
2
3
5
4
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
- 315 -
Table of setting items in the device setup screen
z
Shaded areas are factory-set values.
Item Details
HDD Setup
*1*2*3
*1: Displayed
when the
control panel
[Common
storage
settings]>
[Enable
initialization]
is set to [Yes].
*2: Displayed
when [Boot
Menu]> [HDD
Setup]>
[Enable HDD]
in the control
panel is set to
[Yes].
*3: Displayed
when the HDD
is mounted.
Initialize Execute Initializes the HDD.
Resize
Partition
PCL nn% 20% Sets the partition size.
Common
mm%
50%
PS ll% 30%
<Apply>
Format Partition
PCL
Common
PS
Formats the selected partition.
Erase HDD Execute Deletes all HDD data such that it cannot be
recovered.
Storage
Common
Setup
*1
*1: Displayed
when the
HDD is
mounted.
Check File System
*2
*2: Displayed when
[Boot Menu]>[HDD
Setup]>[Enable HDD] in the
control panel is set to [Yes].
Execute Implements management data (FAT information)
recovery, and resolves mismatches between the
actual (free) space in the îš¿le system and the free
space displayed.
Check All Sectors
*2
*2: Displayed when
[Boot Menu]>[HDD
Setup]>[Enable HDD] in the
control panel is set to [Yes].
Execute Recovers defective sector information on the HDD
and îš¿le system nonconformances.
Enable Initialization
No
Yes
Sets whether or not to authorize setup changes
concomitant with HDD and ash memory
initialization.
Security
Setup
*1
*1: Displayed
when the
HDD (option)
is mounted
and [Boot
Menu] >
[HDD Setup]
>[Enable
HDD] is set to
[Yes] on the
control panel.
Job Limitation Off
Encrypted job
Sets the job restriction mode controls.
If [Job encryption] is selected, non-encrypted
secure prints will be discarded.
Make Secure HDD
*2
*2: Displayed when [Storage
Common Setup]>[Enable
Initialization] is set to [Yes]
on the control panel and the
HDD encryption is disabled.
Execute Enables the data encryption function stored on
the HDD. All data stored on the HDD to date
will become unrecoverable when this process is
implemented.
Make Normal HDD
*3
*3: Displayed when [Storage
Common Setup]>[Enable
Initialization] is set to [Yes]
on the control panel and the
HDD encryption is enabled.
Execute Unlocks the data encryption function stored on
the HDD. All data stored on the HDD to date
will become unrecoverable when this process is
implemented.
Reset Cipher Key
*3
*3: Displayed when [Storage
Common Setup]>[Enable
Initialization] is set to [Yes]
on the control panel and the
HDD encryption is enabled.
Execute Regenerates the encryption key used in the
encrypted HDD. All data stored on the HDD to date
will become unrecoverable when this process is
implemented.
To Next Page
Loading...
Need help?
General
