- 84 -
Adjusting the Image Stretch (Print Length) Using the Control Panel
4
1
2
3
5
Apéndice Índice
Comprobar y cambiar
la conguración de la
impresora utilizando el
panel de control
Cong de
red
Concordar
los colores
Utilización
de software
de utilidades
Funciones de
impresión útiles
5
Press the scroll button or to select
the adjustment amount, and press the
[OK] button. Check that
is displayed
to the left of the selected value.
6
Press the [ON LINE] button to return to
the standby screen.
Note
z
Adjust with [+] to enlarge the print result on the feed
direction of the paper and [-] to reduce.
z
Refer to "Correcting the print start position" (P.81) for
correcting the print start position of the paper edge.
z
Readjustment might be necessary depending on the usage
conditions (temperature and humidity/media type).
z
This function adjusts the scale of image and does not
improve the image scale precision (±1mm/100mm).
z
Over-enlarging the print result may stain the back of the
paper.