30
First the document is assigned a
password and processed to a print file
which is saved on the hard disk drive (see
the on-line User's Guide on the
Documentation CD provided with your
printer or at
http://my.okidata.com.)
To print the document, you must go to
the printer and enter a password.
To Print the Document
1. Press ENTER.
2. ∇/ ∆ keys →
Print Secure Job. Press
ENTER.
3. Use the ∆ and ∇ keys to scroll to the
number for the first digit in your
password. Press
ENTER.
4. Repeat the previous step for each
digit in the password.
5. Press
ENTER.
6. Highlight
Print. Press ENTER.
7. Use the ∇/ ∆ keys to enter the value
for
Set Collating Amount. Press ENTER.
Secure Print: The document prints. It
is deleted from the HDD.
Store to HDD: The document prints.
It remains stored until you delete it.
8. The printer goes on line.
To Delete the Document
1. Follow steps 1 through 5 above.
2. ∇/ ∆ keys →
Delete. Press ENTER.
3. Select Yes to confirm the deletion.
4. Press
ENTER.
The printer goes on line.
Secure Print & Store to Hard Disk Drive
To Next Page
Loading...
