34
Power Save sets how long the printer
waits before going into standby mode
(default = 60 min). This saves energy, but
the printer requires time to warm up
when it receives a print job or if you want
to enter the menu and change settings.
Set the Time Interval
1. Press ENTER.
2. Use the ∇ key to scroll down to
Menus. Press ENTER.
3. ∇/ ∆ keys →
System Adjust. Press
ENTER.
4. Highlight
Power Save Time. Press
ENTER.
5. ∇/ ∆ keys → select the time
interval. Press
ENTER.
6. Press
ON LINE to save the setting and
exit the Menu mode.
Disable Power Save
1. Press ENTER.
2. ∇/ ∆ keys →
Admin Setup. Press
ENTER.
3. ∇/ ∆ keys →
Yes. Press ENTER.
Offline appears on the display.
4. Wait for Setup to run.
The
Setup menu appears.
5. ∇/ ∆ keys →
Printer Setup. Press
ENTER.
6. Keep pressing
ENTER repeatedly until
Power Save appears.
7. ∇/ ∆ keys →
Disable. Press ENTER.
8. Press
ON LINE.
9. Press
ENTER to select Exit Setup.
10. Wait for the printer to initialize.
Power Save
To Next Page
Loading...
