8
Reset to Factory Defaults
1. Press ENTER.
2. Use the ∇ key to scroll down to
Admin Setup. Press ENTER.
3. ∇/ ∆ keys →
Yes. Press ENTER.
Offline appears on the display
4. Wait for setup to run.
The
Setup menu appears.
5. ∇/ ∆ keys →
Factory Defaults. Press
ENTER.
6. ∇/ ∆ keys →
Yes. Press ENTER.
The printer resets.
Shutting down
appears on the display.
7. When the printer finishes shutting
down, press
SHUT DOWN / RESTART.
Control_panel_HRef_Set1.jpg
Paper (Media) Settings
Changing
To Next Page
Loading...
