EasyManua.ls Logo

Oki MB770 - Paper Jam in Finisher Section

Oki MB770
390 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45641001TH Rev.1
5-28/
Oki Data CONFIDENTIAL
5.3.2 Paperjaminnishersection
[EA10] Paper not detected
Classification Error content
Paperjaminnishersection Paper was not detected at the finisher within the set period after the
paper was fed by the main unit.
Check item Measures
Entrance transport sensor • Sensorcheck(S1)
• Connectorcheck(P7-2)
• Harnesscheck
Finisher control PC board • Boardcheck
• Connectorcheck(J7)
• Harnesscheck
Parts to be replaced Remark
Entrance transport sensor
Finisher control PC board
[EA20] Early arrival jam
Classification Error content
Paperjaminnishersection A sheet of paper is fed and then the next sheet of paper is fed at an
interval shorter than the specified time.
Check item Measures
Transport path Ifthereispaperinthepapertransportpath,removethepaper.
Entrance transport sensor • Sensorcheck(S1)
• Connectorcheck(P7-2)
• Harnesscheck
Exit transport sensor • Sensorcheck(S2)
• Connectorcheck(P8-1)
• Harnesscheck
Finisher control PC board • Boardcheck
• Connectorcheck(J7,J8)J7:input,J8:output
• Harnesscheck
Parts to be replaced Remark
Entrance transport sensor
Exit transport sensor
Finisher control PC board

Table of Contents

Other manuals for Oki MB770

Related product manuals