To Next Page

To Previous Page

45641001TH Rev.1

4-12 /

Oki Data CONFIDENTIAL

4.3.2 Upper limit value in the Toner Saving Mode

Theupperlimitvalueofthedensitywhen“Tonersave”isselectedintheCustomtabofthe

printerdrivercanbeadjusted.

<AdjustmentMode(05)>

Color PS PCL XPS 1200dpi Remarks

Black

mode

7307-0 7307-1 7307-2 7302 Thesmallerthevalueis,thelighterthedensityof

image becomes.

Acceptable values: 0 to 255 (Default: 176)

The procedure is the same as that of



P.4-11“4.3.1Gammabalanceadjustment(Black

Mode)”.

4.3.3 Thinlinewidthlowerlimitadjustment

<AdjustmentMode(05)>

Code Remarks

8240(600dpi) Setsthelowerlimitvalueofthethinlinewidthwhen“DistinguishThinLines”

is selected in the screen selecting menu of the printer driver.

Thelargerthevalueis,thethicker(darker)thethinlinebecomes.

Acceptablevalues:1to9(Default:1for8240/4for8241)

8241(1200dpi)

(1) Whilepressing[0]and[5]simultaneously,turnthepowerON.

(2) Keyinthecodestobeadjustedandpressthe[START]button.

(3) Keyintheadjustmentvalue.(Tocorrectthevalueoncekeyedin,pressthe[CLEAR]button.)

(4) Pressthe[OK]or[INTERRUPT]buttontostorethevalueinmemory.

→

Theequipment

goes back to the ready state.

(5) Forresettingthevalue,repeatstep(2)to(4).

(6) Lettheequipmentrestartandperformtheprintingjob.

(7) Ifthedesiredimagehasnotbeenattained,repeatstep(1)to(6).

Oki MB770 Service Manual

Other manuals for Oki MB770