Oki MB770 - HDD Assist Mode (4 C)

45641001TH Rev.1
3-18/
Oki Data CONFIDENTIAL
3.10 HDD Assist Mode (4C)
3.10.1 General description
ThismodeisavailableonlywhenthesecurityHDD(ADI-HDD)ismountedintheequipment.It
enablesyoutocheckthetypeofthemountedHDD,reverttheADI-HDDtothefactorydefaultor
remove keys.
Functions
• Checksthetype(ADIorSATA)ofthemountedHDD.
• DisposesofADI-HDDdatasafelywithoutanyofleakage.
• DeletesimagedatawhenreusingausedADI-HDD.
3.10.2 Operation procedure
(
HDD data
clear
)
[4][C]
[Power]
[STOP]
Operation
Failed
for SATA-HDD
Cancel
[Power] OFF[START]
[Digital Key]
(Select)
TurnthepowerONwhilepressingthe[4]andthe[CLEAR]buttonsimultaneously.Thenthetype
of the mounted HDD is checked and either of the following screens is displayed.
• WhenthesecurityHDDismounted
HDD Assist Mode
Current HDD type: ADI HDD
Select number (1-2) and press START key
1. Revert factory initial status HDD
2. Remove key
System Firmware Version
Update Mode
: xxxx(x.x.x.x)
: 4c Mode
Fig. 3-7