Oki MB770 - Test Print Mode (Test Mode 04)

45641001TH Rev.1
3-9 /
Oki Data CONFIDENTIAL
3.5 Test print mode (test mode 04)
The embedded test pattern can be printed out in the test print mode (04).
<Procedure 1>
[0][4]
[POWER]
[POWER]
OFF/ON
(Exit)
(Code) (Media selection)
[START]
[CLEAR]Operation
Continuous
Test Printing
Notes:
• Whenanerroroccurs,itisindicatedonthepanel,buttherecoveryoperationisnot
performed.
Turn OFF the power and then back ON to clear the error.
• Duringtestprinting,the[CLEAR]buttonisdisabledwhen“Waitaddingtoner”isdisplayed.
Referto“Appendix”inthismanualforthecodesavailableinthetestprintmode.