EasyManuals Logo

Oki MB770 Service Manual

Oki MB770
390 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #273 background imageLoading...
Page #273 background image
45641001TH Rev.1
8-23/
Oki Data CONFIDENTIAL
8.4.2 Systemrmware
ThesystemrmwarecanbeupdatedindividuallybyusingPWA-DWNLD-JIG2.
Important:
• Besuretoshutdowntheequipmentbeforeinstallingandremovingthedownloadjig.
• Donotshutdowntheequipmentduringtheupdate.Thedatacouldbedamagedandnotbe
able to be operated properly.
[A] Update procedure
(1) WritetheROMdatatobeupdatedtothedownloadjig(PWA-DWNLD-JIG2).
(2) Pressthe[ON/OFF]buttontoshutdowntheequipment.
(3) Take off the right side cover.
P.6-1“6.1.1Rightsidecover”
(4) Take off the SYS board cover.
P.6-4“6.1.2SYSBoardcover”
(5) Connectthedownloadjigwiththejigconnector(CN105)ontheSYSboard.
(6) Turn the power ON by pressing the [ON/OFF] button while simultaneously holding
downthe[8]and[9]keys.
(7) Pressthe[FirmwareUpdate]button,thenpressthe[1]keytoselect“1.SYSTEM
FIRMWARE(OSData)”.
(8) Conrmtheitemtobeupdated.
“=>”isdisplayednexttotheselecteditem.Displayordeletethe“=>”bypressingthe
number of the item.
(9) Press the [START] button. Updating starts and the processing status is displayed on
theLCDscreen.
(10)“Updatesuccessfullycompleted.isdisplayedontheLCDscreenaftertheupdatingis
completed properly. Turn the power OFF by pressing the [ON/OFF] button.
Notes:
“UpdateFailed.isdisplayedatthebottomoftheLCDscreenwhentheupdatingis
notcompletedproperly.“Failed”appearsnexttothefaileditemonthestatusdisplay.
Inthiscase,shutdowntheequipmentandcheckthefollowingitems.Thenclearthe
problems and restart updating from the beginning.
• Isthedownloadjigconnectedproperly?
• Istheupdatingdatawrittentothedownloadjigproperly?
• Dothedownloadjigandtheequipmentoperateproperly?
(11)TurnthepowerOFFusingthemainpowerswitch,removethedownloadjig,andthen
install the SYS board cover and rear cover.
(12) Turn the power ON using the main power switch while holding down the [3] and [C]
keys simultaneously.
(13)Pressthe[5]keytoselect“5.KeyBackupRestore”,thenpressthe[START]button.

Table of Contents

Other manuals for Oki MB770

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oki MB770 and is the answer not in the manual?

Oki MB770 Specifications

General IconGeneral
BrandOki
ModelMB770
CategoryAll in One Printer
LanguageEnglish

Related product manuals