Oki MB770 - Notices

45641001TH Rev.1
10-5 /
Oki Data CONFIDENTIAL
10.3 Notices
10.3.1 Setting code
Eachsignalwillbeenabledbyconguringthesettingcode“08-9016”(Counterinstalled
externally).
08-9016
0: No external counter (Default)
1: Coin controller
5: Coin controller supporting ACS
10.3.2 Setting value change and restrictions when using the coin controller
1. Setting value
- 08-9016(Counterinstalledexternally): Setto“1”(Coincontroller).Thecoincontroller
supportingACS(AutoColorSelection)canbeconnectedbysettingto“5”(Coincontroller
supportingACS/mixed-size).However,operationisnotguaranteedunlessthespecication
for the ACS timing is met.
- 08-9017(Settingforcounterinstalledexternally):Itshouldbechargedpreciselyaccording
to the usage.
 Example:Tochargeonlywhencopiesaremade,setto“1”.
- 08-6011(Denitionsettingoflargesizedpaper):
-Settingvalue“0”: SetthisvaluetoregardA3,LD,undefined,andcustomsizethat
exceeds 415 mm as large size.
-Settingvalue“1”: SetthisvaluetoregardA3,LD,undened,B4,Folio,14”LG,13.5”LG,
13”LG,Computerandcustomsizethatexceeds325mmaslargesize.
-Settingvalue“2”: SetthisvaluetoregardB4andcustomsizethatexceeds325mmas
large size.