EasyManuals Logo

Oki MB770 Service Manual

Oki MB770
390 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
45641001TH Rev.1
v /
Oki Data CONFIDENTIAL
2. General Precautions at Service
- Be sure to turn the power OFF and unplug the power cable during service (except for the
service should be done with the power turned ON).
- Unplug the power cable and clean the area around the prongs of the plug and socket outlet
once a year or more. A fire may occur when dust lies on this area.
- Whenthepartsaredisassembled,reassemblyisthereverse ofdisassemblyunless
otherwise noted in this manual or other related documents. Be careful not to install small
partssuchasscrews,washers,pins,E-rings,starwashers,harnessesinthewrongplaces.
- Basically,theequipmentshouldnotbeoperatedwithanypartsremovedordisassembled.
- The PC board must be stored in an anti-electrostatic bag and handled carefully using a
antistatic wrist strap since the ICs on it may be damaged due to static electricity.
Caution: Beforeusingtheantistaticwriststrap,unplugthepowercableoftheequipment
andmakesurethattherearenochargedobjectswhicharenotinsulatedinthe
vicinity.
- Be sure not to touch high-temperature sections such as the fuser unit and areas around
them.
- Besurenottotouchhigh-voltagesectionssuchasthechargers,transferbelt,developer,
high-voltagetransformer,andpowersupplyunit.Especially,theboardofthese
componentsshouldnotbetouchedsincetheelectricchargemayremaininthecapacitors,
etc. on them even after the power is turned OFF.
- Makesurethattheequipmentwillnotoperatebeforetouchingpotentiallydangerousplaces
(e.g.rotating/operatingsectionssuchasgears,beltspulleys,andfans).
- Be careful when removing the covers since there might be the parts with very sharp edges
underneath.
- WhenservicingtheequipmentwiththepowerturnedON,besurenottotouchlivesections
and rotating/operating sections.
- Usedesignatedjigsandtools.
- Userecommendedmeasuringinstrumentsorequivalents.
- Return the equipment to the original state and checkthe operation when the service is
finished.
- Be very careful to treat the touch panel gently and never hit it. Breaking the surface could
cause malfunctions.
3. Important Service Parts for Safety
- The door switch,fuse, thermostat, thermofuse,thermistor,batteries,IC-RAMsincluding
lithium batteries, etc. are particularly important for safety. Be sure to handle/install them
properly.Ifthesepartsareshort-circuitedandtheirfunctionsbecomeineffective,theymay
result in fatal accidents such as a burnout. Avoid short-circuiting and do not use parts not
recommendedbyOKIDATACorporation.

Table of Contents

Other manuals for Oki MB770

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oki MB770 and is the answer not in the manual?

Oki MB770 Specifications

General IconGeneral
BrandOki
ModelMB770
CategoryAll in One Printer
LanguageEnglish

Related product manuals