Installing additional memory > 115
I
NSTALLING
ADDITIONAL
MEMORY
This section explains how to install additional RAM memory into your MFP as a memory
upgrade.
The basic MFP model comes equipped with 128MB of memory (64 Mb “on-board” and 64
Mb in the option slot). This can be upgraded by substituting the option memory (64Mb)
with a memory board containing 256MB, giving a maximum total memory capacity of
320MB.
1. Switch the MFP off and disconnect the AC power cable.
2. Lift the scanner.
3. Press the cover release (a) and open the top cover of the printer (b) fully.
WARNING!
If the MFP has been powered on, the fuser will be hot. This area is
clearly labelled. Do not touch.
To Next Page
Loading...
Need help?
General
