Maintenance > 103
4. Holding it by its top centre, lift the image drum, complete with its toner cartridge, up
and out of the printer.
5. Put the old unit down gently onto a piece of paper to contain any toner spillage.
6. Take the new image drum unit, complete with toner cartridge (assembled according
to the installation guide) and place it on the piece of paper alongside the old ID unit.
7. Remove the protective sheets from the image drum unit. Keep it the same way
round as the old unit. Pack the old ID unit inside the packaging material for disposal.
CAUTION!
The green image drum surface at the base of the cartridge is very
delicate and light sensitive. Do not touch it and do not expose it to
normal room light for more than 5 minutes. If the drum unit needs
to be out of the printer for longer than this, please wrap the
cartridge inside a black plastic bag to keep it away from light.
Never expose the drum to direct sunlight or very bright room
lighting.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
