Oki MC360 - Getting Started; Releasing the Scanner Lock; Switching off

Getting started > 16
G ETTING STARTED
R ELEASING THE SCANNER LOCK
1. Open the document cover.
2. Move scan lock lever to UNLOCKED position.
S WITCHING OFF
1. Press the Down arrow button on the control panel to highlight Menu, press Enter to
select.
2. Press the Down arrow button on the control panel to highlight System Shutdown,
press Enter to select.
3. Press Enter to execute.
4. At the prompt, turn the power switch OFF.
CAUTION!
Make sure the scanner is in the UNLOCKED position before
operating.
NOTE
If you need to transport or move your MFP for any reason;
1. Ensure the scanning head is in the left most position, then turn off the
MFP.
2. Move the scan lock lever to the LOCKED position.
CAUTION!
Do not turn off the power switch suddenly as this may damage your
MFP.
Downloaded From ManualsPrinter.com Manuals