Getting started > 27
6. Close the cassette tray gently.
To prevent paper jams:
> Do not leave space between the paper and the guides and rear stopper.
> Do not overfill the paper tray. Capacity depends on the type of paper stock.
> Do not load damaged paper.
> Do not load paper of different sizes or types at the same time.
> Do not pull the paper tray out during printing.
> Close the paper tray gently.
NOTE
> For face down printing, make sure the face up (rear) stacker is closed (the
paper exits from the top of the printer). Stacking capacity is
approximately 150 sheets, depending on paper weight.
> For face up printing, make sure the face up (rear) stacker is open and the
paper support is extended. Paper is stacked in reverse order and tray
capacity is approximately 10 sheets, depending on paper weight.
> Always use the face up (rear) stacker for heavy paper (card stock, etc.).
CAUTION!
Do not open or close the rear paper exit while printing as it may
result in a paper jam.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
