Faxing (MC360) > 68
TAD interface
Telephone Answering Device Mode (TAD): Use this mode if you want the machine and a
telephone answering machine to share the same phone line. Like Telephone/Fax mode, the
Telephone Answering Device mode detects whether an incoming call is a fax or voice call.
Refer to “Adding a telephone handset” on page 48 for more information.
To set up TAD mode:
1. Using the Down arrow key, scroll to Menu and press Enter.
2. Using the Down arrow key, scroll to Admin Setup and press Enter.
3. Using the arrow keys and on-screen keypad, enter the Administrator password.
Highlight Done and press Enter.
4. Using the Down arrow key, scroll to Fax Setup and press Enter.
5. Using the Down arrow key, scroll to Basic Setup and press Enter.
6. Using the Down arrow key, scroll to TAD Mode and press Enter.
7. Select the appropriate setting; Type1, Type2, Type3.
8. Press the Left arrow key to exit the menu.
Refer to “Reception mode” on page 47 for details on enabling TAD mode.
Remote receiving
If you have an external telephone handset connected to your fax machine, you can instruct
your fax machine to begin receiving by entering a three-digit code on your telephone
keypad. This feature is useful when you answer a call on the external telephone, but need
to switch the line over to your fax machine.
1. Using the Down arrow key, scroll to Menu and press Enter.
2. Using the Down arrow key, scroll to Admin Setup and press Enter.
3. Using the arrow keys and on-screen keypad, enter the Administrator password.
Highlight Done and press Enter.
4. Using the Down arrow key, scroll to Fax Setup and press Enter.
5. Using the Down arrow key, scroll to Basic Setup and press Enter.
6. Using the Down arrow key, scroll to Remote Receive No. and press Enter.
7. Select the appropriate setting; Off, 000, 111, 222, 333, 444, 555, 666, 777, 888,
999, ***, ###.
8. Press the Left arrow key to exit the menu.
Refer to “Remote Receive No.” on page 41.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
