Troubleshooting > 128
I
N
THE
PRINTER
SECTION
...
1. If a sheet is well advanced out of the top of the printer, simply grip it and pull gently
to draw it fully out. If it does not remove easily, do not use excessive force. It can be
removed from the rear later.
2. Gently raise the scanner.
3. Press the cover release (a) and open the output tray (b) fully.
4. Holding it by its handles, lift the image drum assembly, complete with the toner
cartridges, up and out of the printer.
WARNING!
If the MFP has been powered on, the fuser will be hot. This area is
clearly labelled. Do not touch.
a
b
To Next Page
Loading...
