Getting started > 18
G
ETTING
STARTED
T
URNING
ON
YOUR
MACHINE
1. Plug the AC cable into the AC power socket of your machine.
2. Plug the AC cable into the electric socket.
3. Check that no documents are on the document glass or ADF, and the ADF cover is
closed.
4. Hold down the power switch for about a second to turn on the power.
The copy standby screen is displayed after your machine became ready status.
NOTE
Turn the power off, and when turning the power back on again, push the
power switch after waiting for a few seconds.
To Next Page
Loading...
Need help?
General
