Oki Microline 490 User Manual

Menu Mode 27
Entering and Exiting Menu Mode
To enter or exit the Menu Mode, hold SHIFT while pressing
SEL.
Resetting the Menu to the Factory Defaults
Note: Please print the current Menu Mode settings before you
reset or change them. This is the only way to have a
record of the settings.
To reset the Menu to the standard settings (factory defaults):
1 Turn the printer off.
2 Press
SEL + LF while turning the printer on.
Printing the Menu Settings
Printing the Current Menu Settings
1 Make sure paper is loaded in the printer.
2 Press and hold
SHIFT, then press SEL to enter the Menu
Mode.
3 Press
PRINT (PARK key).
Printing All Menu Settings
To print out a listing of the settings for all menu items,
regardless of the emulation selected or the accessories installed:
1 Make sure paper is loaded in the printer.
2 Press and hold
SHIFT, then press SEL to enter the Menu
Mode.
3 Press and hold
SHIFT, then press PRINT QUALITY.

Oki Microline 490 Specifications

General

Brand	Oki
Model	Microline 490
Category	Printer
Language	English