86 Microline 490/491 User’s Guide
USB: Specification 1.1 Compliant
• Requires USB 1.1 cable, maximum length 19.7 ft. (5 m), not
supplied.
• Printer has USB “B” receptacle.
1 Make sure the printer and computer are both turned off.
2 Attach a suitable USB cable to the printer. Then attach the
cable to your computer.
3 Turn the computer and printer back on.
Loading Paper
For instructions on loading paper, see “Loading Paper” in
Chapter 5.
To Next Page
Loading...
Need help?
General