56 Microline 490/491 User’s Guide
4 Remove any torn pieces of paper.
5 Fold some continuous-form paper over three times to make a
page four sheets thick. Then, load it on the tractors and close
and lock the covers.
6 Use the platen knob to draw the quadruple-thick page
around the platen. This brings out jammed pieces of paper.
7 Remove the paper pieces. Then, use the platen knob to back
the paper out.
8 Load regular paper, close and lock the tractor covers.
9 Install the sheet guide, then install the pull-up roller
assembly and close the access cover.
10 Turn the printer on and press FF/LOAD.
To Next Page
Loading...
Need help?
General